| F0
The value of the public exponent
F0 = 3. |
RSAKeyGenParameterSpec |
| F4
The value of the public exponent
F4 = 65537. |
RSAKeyGenParameterSpec |
| FaceDetector(int width, int height, int maxFaces)
Creates a FaceDetector, configured with the size of the images to
be analysed and the maximum number of faces that can be detected.
|
FaceDetector |
| factor
This is the amount of deceleration to add when easing in.
int
|
R.attr |
| FactoryConfigurationError()
Creates a new
FactoryConfigurationError with no error message and
no cause. |
FactoryConfigurationError |
| FactoryConfigurationError(Exception cause)
Creates a new
FactoryConfigurationError with no error message and
a given cause. |
FactoryConfigurationError |
| FactoryConfigurationError(Exception cause, String message)
Creates a new
FactoryConfigurationError with a given error
message and cause. |
FactoryConfigurationError |
| FactoryConfigurationError(String message)
Creates a new
FactoryConfigurationError with a given error
message and no cause. |
FactoryConfigurationError |
| FACTORY_TEST
Run as a manufacturer test application, running as the root user.
|
Manifest.permission |
| fadeDuration
Duration, in milliseconds, of the fade out effect after the user is done
drawing a gesture.
int
|
R.attr |
| fadeEnabled
Defines whether the gesture will automatically fade out after being recognized.
int
|
R.attr |
| fadeOffset
Time, in milliseconds, to wait before the gesture fades out after the user
is done drawing it.
int
|
R.attr |
| fadeScrollbars
Defines whether to fade out scrollbars when they are not in use.
int
|
R.attr |
| fade_in
int
|
R.anim |
| fade_out
int
|
R.anim |
| fadingEdge
Defines which edges should be fadeded on scrolling.
int
|
R.attr |
| fadingEdgeLength
Defines the length of the fading edges.
int
|
R.attr |
| fail()
Fails a test with no message.
|
Assert |
| fail(String message)
Fails a test with the given message.
|
Assert |
| failedTest()
Gets the failed test.
|
TestFailure |
| failureCount()
Gets the number of detected failures.
|
TestResult |
| failures()
Returns an Enumeration for the failures
|
TestResult |
| FAKE_BOLD_TEXT_FLAG
bit mask for the flag enabling fake-bold text
int
|
Paint |
| FALSE
The
Boolean object that represents the primitive value
false. |
Boolean |
| FALSE
a String representation of
false. |
Pack200.Packer |
| FALSE
a String representation of
false. |
Pack200.Unpacker |
| FAMILY
The FAMILY text attribute key.
|
TextAttribute |
| FAMILY_NAME
The family name for the contact.
|
ContactsContract.CommonDataKinds.StructuredName |
| fastScrollEnabled
Enables the fast scroll thumb that can be dragged to quickly scroll through
the list.
int
|
R.attr |
| fatalError(SAXParseException e)
Report a fatal XML parsing error.
|
DefaultHandler |
| fatalError(SAXParseException exception)
Receive notification of a non-recoverable error.
|
ErrorHandler |
| fatalError(SAXParseException e)
Report a fatal XML parsing error.
|
HandlerBase |
| fatalError(SAXParseException e)
Filter a fatal error event.
|
XMLFilterImpl |
| FAVICON | Browser.BookmarkColumns |
| FeatureInfo() | FeatureInfo |
| FeatureInfo(FeatureInfo orig) | FeatureInfo |
| FEATURE_CONTEXT_MENU
Flag for the context menu.
int
|
Window |
| FEATURE_CUSTOM_TITLE
Flag for custom title.
int
|
Window |
| FEATURE_INDETERMINATE_PROGRESS
Flag for indeterminate progress
int
|
Window |
| FEATURE_LEFT_ICON
Flag for having an icon on the left side of the title bar
int
|
Window |
| FEATURE_NO_TITLE
Flag for the "no title" feature, turning off the title at the top
of the screen.
int
|
Window |
| FEATURE_OPTIONS_PANEL
Flag for the "options panel" feature.
int
|
Window |
| FEATURE_PROCESS_DOCDECL
This feature determines whether the document declaration
is processed.
|
XmlPullParser |
| FEATURE_PROCESS_NAMESPACES
This feature determines whether the parser processes
namespaces.
|
XmlPullParser |
| FEATURE_PROGRESS
Flag for the progress indicator feature
int
|
Window |
| FEATURE_REPORT_NAMESPACE_ATTRIBUTES
This feature determines whether namespace attributes are
exposed via the attribute access methods.
|
XmlPullParser |
| FEATURE_RIGHT_ICON
Flag for having an icon on the right side of the title bar
int
|
Window |
| FEATURE_SECURE_PROCESSING
The SAX feature name for secure processing.
|
XMLConstants |
| FEATURE_VALIDATION
If this feature is activated, all validation errors as
defined in the XML 1.0 sepcification are reported.
|
XmlPullParser |
| FEBRUARY
Value of the
MONTH field indicating the second month of
the year.int
|
Calendar |
| FEEDBACK_AUDIBLE
Denotes audible (not spoken) feedback.
int
|
AccessibilityServiceInfo |
| FEEDBACK_GENERIC
Denotes generic feedback.
int
|
AccessibilityServiceInfo |
| FEEDBACK_HAPTIC
Denotes haptic feedback.
int
|
AccessibilityServiceInfo |
| FEEDBACK_SPOKEN
Denotes spoken feedback.
int
|
AccessibilityServiceInfo |
| FEEDBACK_VISUAL
Denotes visual feedback.
int
|
AccessibilityServiceInfo |
| FETCH_FORWARD
A constant used to indicate processing of the rows of a
ResultSet
in the forward direction, first to last.int
|
ResultSet |
| FETCH_REVERSE
A constant used to indicate processing of the rows of a
ResultSet
in the reverse direction, last to first.int
|
ResultSet |
| FETCH_UNKNOWN
A constant used to indicate that the order of processing of the rows of a
ResultSet is unknown.int
|
ResultSet |
| FieldPosition(int field)
Constructs a new
FieldPosition for the specified field. |
FieldPosition |
| FieldPosition(Format.Field attribute)
Constructs a new
FieldPosition for the specified Field
attribute. |
FieldPosition |
| FieldPosition(Format.Field attribute, int field)
Constructs a new
FieldPosition for the specified Field
attribute and field id. |
FieldPosition |
| FIELD_ATTRIBUTE_PFX
the format of a field attribute name.
|
Pack200.Packer |
| FIELD_COUNT
This is the total number of fields in this calendar.
int
|
Calendar |
| File(File dir, String name)
Constructs a new file using the specified directory and name.
|
File |
| File(String path)
Constructs a new file using the specified path.
|
File |
| File(String dirPath, String name)
Constructs a new File using the specified directory path and file name,
placing a path separator between the two.
|
File |
| File(URI uri)
Constructs a new File using the path of the specified URI.
|
File |
| FileDescriptor()
Constructs a new FileDescriptor containing an invalid handle.
|
FileDescriptor |
| FileEntity(File file, String contentType) | FileEntity |
| FileHandler()
Construct a
FileHandler using LogManager properties or
their default value. |
FileHandler |
| FileHandler(String pattern)
Constructs a new
FileHandler. |
FileHandler |
| FileHandler(String pattern, boolean append)
Construct a new
FileHandler. |
FileHandler |
| FileHandler(String pattern, int limit, int count)
Construct a new
FileHandler. |
FileHandler |
| FileHandler(String pattern, int limit, int count, boolean append)
Construct a new
FileHandler. |
FileHandler |
| FileInputStream(File file)
Constructs a new
FileInputStream based on file. |
FileInputStream |
| FileInputStream(FileDescriptor fd) | FileInputStream |
| FileInputStream(String fileName)
Constructs a new
FileInputStream on the file named
fileName. |
FileInputStream |
| fileList()
Returns an array of strings naming the private files associated with
this Context's application package.
|
Context |
| fileList()
Returns an array of strings naming the private files associated with
this Context's application package.
|
ContextWrapper |
| fileList()
Returns an array of strings naming the private files associated with
this Context's application package.
|
MockContext |
| fileList()
Returns an array of strings naming the private files associated with
this Context's application package.
|
RenamingDelegatingContext |
| FileLockInterruptionException()
Constructs a
FileLockInterruptionException. |
FileLockInterruptionException |
| FileNotFoundException()
Constructs a new
FileNotFoundException with its stack trace
filled in. |
FileNotFoundException |
| FileNotFoundException(String detailMessage)
Constructs a new
FileNotFoundException with its stack trace and
detail message filled in. |
FileNotFoundException |
| FileObserver(String path) | FileObserver |
| FileObserver(String path, int mask) | FileObserver |
| FileOutputStream(File file)
Constructs a new FileOutputStream on the File
file. |
FileOutputStream |
| FileOutputStream(File file, boolean append)
Constructs a new FileOutputStream on the File
file. |
FileOutputStream |
| FileOutputStream(FileDescriptor fd)
Constructs a new FileOutputStream on the FileDescriptor
fd. |
FileOutputStream |
| FileOutputStream(String filename)
Constructs a new FileOutputStream on the file named
filename. |
FileOutputStream |
| FileOutputStream(String filename, boolean append)
Constructs a new FileOutputStream on the file named
filename. |
FileOutputStream |
| FilePermission(String path, String actions)
Constructs a new FilePermission with the path and actions specified.
|
FilePermission |
| FileReader(File file)
Constructs a new FileReader on the given
file. |
FileReader |
| FileReader(FileDescriptor fd)
Construct a new FileReader on the given FileDescriptor
fd. |
FileReader |
| FileReader(String filename)
Construct a new FileReader on the given file named
filename. |
FileReader |
| FileWriter(File file)
Creates a FileWriter using the File
file. |
FileWriter |
| FileWriter(File file, boolean append)
Creates a FileWriter using the File
file. |
FileWriter |
| FileWriter(FileDescriptor fd)
Creates a FileWriter using the existing FileDescriptor
fd. |
FileWriter |
| FileWriter(String filename)
Creates a FileWriter using the platform dependent
filename. |
FileWriter |
| FileWriter(String filename, boolean append)
Creates a FileWriter using the platform dependent
filename. |
FileWriter |
| FILL
Grow the horizontal and vertical size of the object if needed so it
completely fills its container.
int
|
Gravity |
| fill()
Fills the input buffer with data to be decompressed.
|
InflaterInputStream
(protected) |
| fill(boolean[] array, boolean value)
Fills the specified array with the specified element.
|
Arrays |
| fill(boolean[] array, int start, int end, boolean value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(byte[] array, byte value)
Fills the specified array with the specified element.
|
Arrays |
| fill(byte[] array, int start, int end, byte value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(char[] array, char value)
Fills the specified array with the specified element.
|
Arrays |
| fill(char[] array, int start, int end, char value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(double[] array, double value)
Fills the specified array with the specified element.
|
Arrays |
| fill(double[] array, int start, int end, double value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(float[] array, float value)
Fills the specified array with the specified element.
|
Arrays |
| fill(float[] array, int start, int end, float value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(int[] array, int value)
Fills the specified array with the specified element.
|
Arrays |
| fill(int[] array, int start, int end, int value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(Object[] array, int start, int end, Object value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(Object[] array, Object value)
Fills the specified array with the specified element.
|
Arrays |
| fill(List<? super T> list, T object)
Fills the specified list with the specified element.
|
Collections |
| fill(long[] array, int start, int end, long value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(long[] array, long value)
Fills the specified array with the specified element.
|
Arrays |
| fill(short[] array, int start, int end, short value)
Fills the specified range in the array with the specified element.
|
Arrays |
| fill(short[] array, short value)
Fills the specified array with the specified element.
|
Arrays |
| fillAfter
When set to true, the animation transformation is applied after the animation is
over.
int
|
R.attr |
| fillBefore
When set to true, the animation transformation is applied before the animation has
started.
int
|
R.attr |
| fillBuffer() | AbstractSessionInputBuffer
(protected) |
| fillEnabled
When set to true, fillAfter is taken into account.
int
|
R.attr |
| fillIn(Intent other, int flags)
Copy the contents of other in to this object, but only
where fields are not defined by this object.
|
Intent |
| fillInNotifierBundle(Bundle bundleToFill)
Fill the cell location data into the intent notifier Bundle based on service state
|
CdmaCellLocation |
| fillInNotifierBundle(Bundle m)
Set intent notifier Bundle based on service state
|
GsmCellLocation |
| fillInStackTrace()
Records the stack trace from the point where this method has been called
to this
Throwable. |
Throwable |
| fillViewport
Defines whether the scrollview should stretch its content to fill the viewport.
int
|
R.attr |
| fillWindow(int position, CursorWindow window)
Copy data from cursor to CursorWindow
|
AbstractCursor |
| fillWindow(int pos, CursorWindow winow)
copies cursor data into the window start at pos
|
CrossProcessCursor |
| FILL_HORIZONTAL
Grow the horizontal size of the object if needed so it completely fills
its container.
int
|
Gravity |
| FILL_IN_ACTION
Use with fillIn(Intent, int) to allow the current action value to be
overwritten, even if it is already set.
int
|
Intent |
| FILL_IN_CATEGORIES
Use with fillIn(Intent, int) to allow the current categories to be
overwritten, even if they are already set.
int
|
Intent |
| FILL_IN_COMPONENT
Use with fillIn(Intent, int) to allow the current component value to be
overwritten, even if it is already set.
int
|
Intent |
| FILL_IN_DATA
Use with fillIn(Intent, int) to allow the current data or type value
overwritten, even if it is already set.
int
|
Intent |
| FILL_IN_PACKAGE
Use with fillIn(Intent, int) to allow the current package value to be
overwritten, even if it is already set.
int
|
Intent |
| FILL_PARENT
Special value for the height or width requested by a View.
int
|
ViewGroup.LayoutParams |
| FILL_VERTICAL
Grow the vertical size of the object if needed so it completely fills
its container.
int
|
Gravity |
| filter
Enables or disables bitmap filtering.
int
|
R.attr |
| Filter()
Creates a new asynchronous filter. |
Filter |
| filter(CharSequence constraint)
Starts an asynchronous filtering operation. |
Filter |
| filter(CharSequence constraint, Filter.FilterListener listener)
Starts an asynchronous filtering operation. |
Filter |
| filter(CharSequence source, int start, int end, Spanned dest, int dstart, int dend)
This method is called when the buffer is going to replace the
range
dstart … dend of dest
with the new text from the range start … end
of source. |
DigitsKeyListener |
| filter(CharSequence source, int start, int end, Spanned dest, int dstart, int dend)
This method is called when the buffer is going to replace the
range
dstart … dend of dest
with the new text from the range start … end
of source. |
InputFilter |
| filter(CharSequence source, int start, int end, Spanned dest, int dstart, int dend)
This method is called when the buffer is going to replace the
range
dstart … dend of dest
with the new text from the range start … end
of source. |
InputFilter.AllCaps |
| filter(CharSequence source, int start, int end, Spanned dest, int dstart, int dend)
This method is called when the buffer is going to replace the
range
dstart … dend of dest
with the new text from the range start … end
of source. |
InputFilter.LengthFilter |
| filter(CharSequence source, int start, int end, Spanned dest, int dstart, int dend)
This method is called when the buffer is going to replace the
range
dstart … dend of dest
with the new text from the range start … end
of source. |
LoginFilter |
| filter(CharSequence source, int start, int end, Spanned dest, int dstart, int dend)
This method is called when the buffer is going to replace the
range
dstart … dend of dest
with the new text from the range start … end
of source. |
NumberKeyListener |
| Filter.FilterResults() | Filter.FilterResults |
| FILTERED
Possible value for compression strategy.
int
|
Deflater |
| filterEquals(Intent other)
Determine if two intents are the same for the purposes of intent
resolution (filtering).
|
Intent |
| filterHashCode()
Generate hash code that matches semantics of filterEquals().
|
Intent |
| filterHeader(int index)
Checks whether a header is part of the iteration.
|
BasicHeaderIterator
(protected) |
| filterHeader(int index)
Checks whether a header is part of the iteration.
|
BasicListHeaderIterator
(protected) |
| FilterOutputStream(OutputStream out)
Constructs a new
FilterOutputStream with out as its
target stream. |
FilterOutputStream |
| FILTER_BITMAP_FLAG
bit mask for the flag enabling bitmap filtering
int
|
Paint |
| FILTER_CONTACTS_ACTION
This constant is deprecated.
see ContactsContract
|
Contacts.Intents.UI |
| FILTER_TEXT_EXTRA_KEY
This constant is deprecated.
see ContactsContract
|
Contacts.Intents.UI |
| FINAL
The
int value representing the final modifier.int
|
Modifier |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
AbstractCursor
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Activity
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
AssetManager
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
AssetManager.AssetInputStream
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
AudioRecord
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
AudioTrack
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Binder
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Bitmap
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Camera
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Camera
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Canvas
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
ColorFilter
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
ContentQueryMap
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
CursorWindow
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Deflater
(protected) |
| finalize()
Called when the class is finalized.
|
DexFile
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
DrawFilter
(protected) |
| finalize()
Frees the references to the key used to initialize this instance.
|
ExemptionMechanism
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
FaceDetector
(protected) |
| finalize()
Ensures that all resources for this stream are released when it is about
to be garbage collected.
|
FileInputStream
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
FileObserver
(protected) |
| finalize()
Frees any resources allocated for this stream before it is garbage
collected.
|
FileOutputStream
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Inflater
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Interpolator
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
JetPlayer
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
KeyCharacterMap
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
MaskFilter
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Matcher
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Matrix
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
MediaPlayer
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
MediaRecorder
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
MemoryFile
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Object
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Paint
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Parcel
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
ParcelFileDescriptor
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Path
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
PathEffect
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
PathMeasure
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Pattern
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Picture
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
PowerManager.WakeLock
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Rasterizer
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Region
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
RegionIterator
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Resources.Theme
(protected) |
| finalize()
Release the native resources, if they haven't been released yet.
|
SQLiteCursor
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
SQLiteDatabase
(protected) |
| finalize()
Make sure that the native resource is cleaned up.
|
SQLiteProgram
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Service
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Shader
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
SingleClientConnManager
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
SoundPool
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
StatFs
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Surface
(protected) |
| finalize()
Invokes
shutdown when this executor is no longer
referenced and it has no threads. |
ThreadPoolExecutor
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
ThreadSafeClientConnManager
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
ToneGenerator
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Typeface
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
View
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
WebView
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
WifiManager.MulticastLock
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
WifiManager.WifiLock
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
Xfermode
(protected) |
| finalize()
Is called before the object's memory is being reclaimed by the VM.
|
ZipFile
(protected) |
| FINAL_QUOTE_PUNCTUATION
Unicode category constant Pf.
byte
|
Character |
| find()
Returns the next occurrence of the Pattern in the input.
|
Matcher |
| find(int start)
Returns the next occurrence of the Pattern in the input.
|
Matcher |
| findAddress(String addr)
Return the first substring consisting of the address of a physical
location.
|
WebView |
| findAll(String find) | WebView |
| findAttribHandler(String name)
Finds an attribute handler CookieAttributeHandler for the
given attribute.
|
AbstractCookieSpec
(protected) |
| findClass(String className)
Overridden by subclasses, throws a
ClassNotFoundException by
default. |
ClassLoader
(protected) |
| findClass(String name)
Finds a class.
|
DexClassLoader
(protected) |
| findClass(String name)
Finds a class.
|
PathClassLoader
(protected) |
| findClass(String clsName)
Tries to locate and load the specified class using the known URLs.
|
URLClassLoader
(protected) |
| findColumn(String columnName)
Gets the index number for a column in the
ResultSet from the
provided column name. |
ResultSet |
| findDrawableByLayerId(int id)
Look for a layer with the given id, and returns its Drawable.
|
LayerDrawable |
| findEditTable(String tables)
Finds the name of the first table, which is editable.
|
SQLiteDatabase |
| findEncodingByName(String encodingName)
Finds an encoding by name.
|
Xml |
| findFaces(Bitmap bitmap, Face[] faces)
Finds all the faces found in a given Bitmap.
|
FaceDetector |
| findFocus()
Find the view in the hierarchy rooted at this view that currently has
focus.
|
View |
| findFocus()
Find the view in the hierarchy rooted at this view that currently has
focus.
|
ViewGroup |
| findIndexOfValue(String value)
Returns the index of the given value (in the entry values array).
|
ListPreference |
| findInLine(String pattern)
Compiles the pattern string and tries to find a substing matching it in the input data.
|
Scanner |
| findInLine(Pattern pattern)
Tries to find the pattern in the input.
|
Scanner |
| findItem(int id)
Return the menu item with a particular identifier.
|
Menu |
| findLibrary(String libName)
Returns the absolute path of the native library with the specified name,
or
null. |
ClassLoader
(protected) |
| findLibrary(String libname)
Finds a native library.
|
DexClassLoader
(protected) |
| findLibrary(String libname)
Finds a native library.
|
PathClassLoader
(protected) |
| findLoadedClass(String className)
Returns the class with the specified name if it has already been loaded
by the virtual machine or
null if it has not yet been loaded. |
ClassLoader
(protected) |
| findNearestTouchable(ViewGroup root, int x, int y, int direction, int[] deltas)
Find the nearest touchable view to the specified view.
|
FocusFinder |
| findNext(boolean forward) | WebView |
| findNext(int from)
Determines the index of the next header.
|
BasicHeaderIterator
(protected) |
| findNext(int from)
Determines the index of the next header.
|
BasicListHeaderIterator
(protected) |
| findNext(int from)
Determines the next token.
|
BasicTokenIterator
(protected) |
| findNextFocus(ViewGroup root, View focused, int direction)
Find the next view to take focus in root's descendants, starting from the view
that currently is focused.
|
FocusFinder |
| findNextFocusFromRect(ViewGroup root, Rect focusedRect, int direction)
Find the next view to take focus in root's descendants, searching from
a particular rectangle in root's coordinates.
|
FocusFinder |
| findPointerIndex(int pointerId)
Given a pointer identifier, find the index of its data in the event.
|
MotionEvent |
| findPreference(CharSequence key)
Finds a Preference based on its key.
|
PreferenceActivity |
| findPreference(CharSequence key)
Finds a Preference based on its key.
|
PreferenceGroup |
| findPreference(CharSequence key)
Finds a Preference based on its key.
|
PreferenceManager |
| findPreferenceInHierarchy(String key)
Finds a Preference in this hierarchy (the whole thing,
even above/below your PreferenceScreen screen break) with the given
key.
|
Preference
(protected) |
| findResource(String resName)
Finds the URL of the resource with the specified name.
|
ClassLoader
(protected) |
| findResource(String name)
Finds a resource.
|
DexClassLoader
(protected) |
| findResource(String name)
Finds a resource.
|
PathClassLoader
(protected) |
| findResource(String name)
Returns an URL referencing the specified resource or
null if the
resource could not be found. |
URLClassLoader |
| findResources(String resName)
Finds an enumeration of URLs for the resource with the specified name.
|
ClassLoader
(protected) |
| findResources(String resName)
Finds an enumeration of URLs for the resource with the specified name.
|
PathClassLoader
(protected) |
| findResources(String name)
Returns all known URLs which point to the specified resource.
|
URLClassLoader |
| findSystemClass(String className)
Finds the class with the specified name, loading it using the system
class loader if necessary.
|
ClassLoader
(protected) |
| findTokenEnd(int from)
Determines the ending position of the current token.
|
BasicTokenIterator
(protected) |
| findTokenEnd(CharSequence text, int cursor)
Returns the end of the token (minus trailing punctuation)
that begins at offset
cursor within text. |
MultiAutoCompleteTextView.CommaTokenizer |
| findTokenEnd(CharSequence text, int cursor)
Returns the end of the token (minus trailing punctuation)
that begins at offset
cursor within text. |
MultiAutoCompleteTextView.Tokenizer |
| findTokenEnd(CharSequence text, int cursor)
Returns the end of the token (minus trailing punctuation)
that begins at offset
cursor within text.
|
Rfc822Tokenizer |
| findTokenSeparator(int from)
Determines the position of the next token separator.
|
BasicTokenIterator
(protected) |
| findTokenStart(int from)
Determines the starting position of the next token.
|
BasicTokenIterator
(protected) |
| findTokenStart(CharSequence text, int cursor)
Returns the start of the token that ends at offset
cursor within text. |
MultiAutoCompleteTextView.CommaTokenizer |
| findTokenStart(CharSequence text, int cursor)
Returns the start of the token that ends at offset
cursor within text. |
MultiAutoCompleteTextView.Tokenizer |
| findTokenStart(CharSequence text, int cursor)
Returns the start of the token that ends at offset
cursor within text.
|
Rfc822Tokenizer |
| findViewById(int id)
Finds a view that was identified by the id attribute from the XML that
was processed in onCreate(Bundle).
|
Activity |
| findViewById(int id)
Finds a view that was identified by the id attribute from the XML that
was processed in onStart().
|
Dialog |
| findViewById(int id)
Look for a child view with the given id.
|
View |
| findViewById(int id)
Finds a view that was identified by the id attribute from the XML that
was processed in onCreate(Bundle).
|
Window |
| findViewTraversal(int id)
|
ListView
(protected) |
| findViewWithTag(Object tag)
Look for a child view with the given tag.
|
View |
| findViewWithTagTraversal(Object tag)
|
ListView
(protected) |
| findWithinHorizon(String pattern, int horizon)
Tries to find the pattern in the input between the current position and the specified
horizon. |
Scanner |
| findWithinHorizon(Pattern pattern, int horizon)
Tries to find the pattern in the input between the current position and the specified
horizon.
|
Scanner |
| FINE
The FINE level provides tracing messages.
|
Level |
| fine(String msg)
Logs a message of level
Level.FINE; the message is transmitted
to all subscribed handlers. |
Logger |
| FINER
The FINER level provides more detailed tracing messages.
|
Level |
| finer(String msg)
Logs a message of level
Level.FINER; the message is transmitted
to all subscribed handlers. |
Logger |
| FINEST
The FINEST level provides highly detailed tracing messages.
|
Level |
| finest(String msg)
Logs a message of level
Level.FINEST; the message is transmitted
to all subscribed handlers. |
Logger |
| FINGERPRINT
A string that uniquely identifies this build.
|
Build |
| finish()
Sends the result or a Constants.ERROR_CODE_CANCELED error if a result isn't present.
|
AccountAuthenticatorActivity |
| finish()
Call this when your activity is done and should be closed.
|
Activity |
| finish()
Must be called to ensure the internal cache is flushed and the closing chunk is written.
|
ChunkedOutputStream |
| finish()
Indicates to the
Deflater that all uncompressed input has been provided
to it. |
Deflater |
| finish()
Writes any unwritten data to the underlying stream.
|
DeflaterOutputStream |
| finish()
Indicates to the stream that all data has been written out, and any GZIP
terminal data can now be written.
|
GZIPOutputStream |
| finish()
Indicates that all entries have been written to the stream.
|
ZipOutputStream |
| finish(int resultCode, Bundle results)
Terminate instrumentation of the application.
|
Instrumentation |
| finishActivity(int requestCode)
Force finish another activity that you had previously started with
startActivityForResult(Intent, int).
|
Activity |
| finishActivityFromChild(Activity child, int requestCode)
This is called when a child activity of this one calls its
finishActivity().
|
Activity |
| finishBroadcast()
Clean up the state of a broadcast previously initiated by calling
beginBroadcast().
|
RemoteCallbackList |
| finishComposingText()
The default implementation removes the composing state from the
current editable text.
|
BaseInputConnection |
| finishComposingText()
Have the text editor finish whatever composing text is currently
active.
|
InputConnection |
| finishComposingText()
Have the text editor finish whatever composing text is currently
active.
|
InputConnectionWrapper |
| finishConnect()
Completes the connection process initiated by a call of
connect(SocketAddress). |
SocketChannel |
| finished()
Returns whether or not all provided data has been successfully
compressed.
|
Deflater |
| finished()
Indicates if the
Inflater has inflated the entire deflated
stream. |
Inflater |
| finishedEvent(int seq, boolean handled) | InputMethodSession.EventCallback |
| finishFromChild(Activity child)
This is called when a child activity of this one calls its
finish() method.
|
Activity |
| finishInput() | InputMethodService.InputMethodSessionImpl |
| finishInput()
This method is called when the application would like to stop
receiving text input.
|
InputMethodSession |
| finishInternalChanges()
Finish making changes that will not be reported to the client.
|
ExtractEditText |
| finishOnCloseSystemDialogs
Specify whether an activity should be finished when a "close system
windows" request has been made.
int
|
R.attr |
| finishOnTaskLaunch
Specify whether an activity should be finished when its task is
brought to the foreground by relaunching from the home screen.
int
|
R.attr |
| finishPreloading()
Called by zygote when it is done preloading resources, to change back
to normal Resources operation.
|
Resources |
| finishTiming(boolean realTime) | PerformanceTestCase.Intermediates |
| fireIndexedPropertyChange(String propertyName, int index, boolean oldValue, boolean newValue)
Fires a property change of a boolean property with the given name.
|
PropertyChangeSupport |
| fireIndexedPropertyChange(String propertyName, int index, int oldValue, int newValue)
Fires a property change of an integer property with the given name.
|
PropertyChangeSupport |
| fireIndexedPropertyChange(String propertyName, int index, Object oldValue, Object newValue)
Fires an IndexedPropertyChangeEvent with the given name, old
value, new value and index.
|
PropertyChangeSupport |
| firePropertyChange(PropertyChangeEvent event)
Fires a property change event to all listeners of that property.
|
PropertyChangeSupport |
| firePropertyChange(String propertyName, boolean oldValue, boolean newValue)
Fires a property change of a boolean property with the given name.
|
PropertyChangeSupport |
| firePropertyChange(String propertyName, int oldValue, int newValue)
Fires a property change of an integer property with the given name.
|
PropertyChangeSupport |
| firePropertyChange(String propertyName, Object oldValue, Object newValue)
Fires a PropertyChangeEvent with the given name, old value and
new value.
|
PropertyChangeSupport |
| FIRST
First value for group and item identifier integers.
int
|
Menu |
| first()
Sets this iterator's current position to the first boundary and returns
that position.
|
BreakIterator |
| first()
Sets the current position to the begin index and returns the character at
the new position.
|
CharacterIterator |
| first()
Shifts the cursor position to the first row in the
ResultSet. |
ResultSet |
| first()
Returns the first element in this
SortedSet. |
SortedSet |
| first()
Sets the current position to the begin index and returns the character at
the new position in the source string.
|
StringCharacterIterator |
| first()
Returns the first element in this
TreeSet. |
TreeSet |
| firstElement()
Returns the first element in this vector.
|
Vector |
| firstKey()
Returns the first key in this sorted map.
|
SortedMap |
| firstKey()
Returns the first key in this map.
|
TreeMap |
| firstStep(RouteInfo plan)
Determines the first step to establish a route.
|
BasicRouteDirector
(protected) |
| FIRST_APPLICATION_UID
Defines the start of a range of UIDs (and GIDs), going from this
number to LAST_APPLICATION_UID that are reserved for assigning
to applications.
int
|
Process |
| FIRST_APPLICATION_WINDOW
Start of window types that represent normal application windows.
int
|
WindowManager.LayoutParams |
| FIRST_CALL_TRANSACTION
The first transaction code available for user commands.
int
|
IBinder |
| FIRST_SUB_WINDOW
Start of types of sub-windows.
int
|
WindowManager.LayoutParams |
| FIRST_SYSTEM_WINDOW
Start of system-specific window types.
int
|
WindowManager.LayoutParams |
| FIRST_YEAR
The year in which the earliest songs
on this album were released.
|
MediaStore.Audio.AlbumColumns |
| fitsSystemWindows
Boolean internal attribute to adjust view layout based on
system windows such as the status bar.
int
|
R.attr |
| fitSystemWindows(Rect insets)
Apply the insets for system windows to this view, if the FITS_SYSTEM_WINDOWS flag
is set
|
View
(protected) |
| fitSystemWindows(Rect insets)
Apply the insets for system windows to this view, if the FITS_SYSTEM_WINDOWS flag
is set
|
ViewGroup
(protected) |
| fixText(CharSequence invalidText)
Corrects the specified text to make it valid.
|
AutoCompleteTextView.Validator |
| flags()
Returns the flags that have been set for this
Pattern. |
Pattern |
| FLAGS_CHANGED
int
|
WindowManager.LayoutParams |
| FLAG_ACTIVITY_BROUGHT_TO_FRONT
This flag is not normally set by application code, but set for you by
the system as described in the
launchMode documentation for the singleTask mode.
int
|
Intent |
| FLAG_ACTIVITY_CLEAR_TOP
If set, and the activity being launched is already running in the
current task, then instead of launching a new instance of that activity,
all of the other activities on top of it will be closed and this Intent
will be delivered to the (now on top) old activity as a new Intent.
int
|
Intent |
| FLAG_ACTIVITY_CLEAR_WHEN_TASK_RESET
If set, this marks a point in the task's activity stack that should
be cleared when the task is reset.
int
|
Intent |
| FLAG_ACTIVITY_EXCLUDE_FROM_RECENTS
If set, the new activity is not kept in the list of recently launched
activities.
int
|
Intent |
| FLAG_ACTIVITY_FORWARD_RESULT
If set and this intent is being used to launch a new activity from an
existing one, then the reply target of the existing activity will be
transfered to the new activity.
int
|
Intent |
| FLAG_ACTIVITY_LAUNCHED_FROM_HISTORY
This flag is not normally set by application code, but set for you by
the system if this activity is being launched from history
(longpress home key).
int
|
Intent |
| FLAG_ACTIVITY_MULTIPLE_TASK
Do not use this flag unless you are implementing your own
top-level application launcher.
int
|
Intent |
| FLAG_ACTIVITY_NEW_TASK
If set, this activity will become the start of a new task on this
history stack.
int
|
Intent |
| FLAG_ACTIVITY_NO_ANIMATION
If set in an Intent passed to Context.startActivity(),
this flag will prevent the system from applying an activity transition
animation to go to the next activity state.
int
|
Intent |
| FLAG_ACTIVITY_NO_HISTORY
If set, the new activity is not kept in the history stack.
int
|
Intent |
| FLAG_ACTIVITY_NO_USER_ACTION
If set, this flag will prevent the normal onUserLeaveHint()
callback from occurring on the current frontmost activity before it is
paused as the newly-started activity is brought to the front.
int
|
Intent |
| FLAG_ACTIVITY_PREVIOUS_IS_TOP
If set and this intent is being used to launch a new activity from an
existing one, the current activity will not be counted as the top
activity for deciding whether the new intent should be delivered to
the top instead of starting a new one.
int
|
Intent |
| FLAG_ACTIVITY_REORDER_TO_FRONT
If set in an Intent passed to Context.startActivity(),
this flag will cause the launched activity to be brought to the front of its
task's history stack if it is already running.
int
|
Intent |
| FLAG_ACTIVITY_RESET_TASK_IF_NEEDED
If set, and this activity is either being started in a new task or
bringing to the top an existing task, then it will be launched as
the front door of the task.
int
|
Intent |
| FLAG_ACTIVITY_SINGLE_TOP
If set, the activity will not be launched if it is already running
at the top of the history stack.
int
|
Intent |
| FLAG_ALLOW_CLEAR_USER_DATA
Value for flags: default value for the corresponding ActivityInfo flag.
int
|
ApplicationInfo |
| FLAG_ALLOW_RINGER_MODES
Whether to include ringer modes as possible options when changing volume.
int
|
AudioManager |
| FLAG_ALLOW_TASK_REPARENTING
Bit in flags that indicates that the activity can be moved
between tasks based on its task affinity.
int
|
ActivityInfo |
| FLAG_ALLOW_TASK_REPARENTING
Value for flags: default value for the corresponding ActivityInfo flag.
int
|
ApplicationInfo |
| FLAG_ALT_FOCUSABLE_IM
Window flag: invert the state of FLAG_NOT_FOCUSABLE with
respect to how this window interacts with the current method.
int
|
WindowManager.LayoutParams |
| FLAG_ALWAYS_PERFORM_CLOSE
Flag for performShortcut(int, KeyEvent, int): if set, always
close the menu after executing the shortcut.
int
|
Menu |
| FLAG_ALWAYS_RETAIN_TASK_STATE
Bit in flags indicating that, when the activity is the root
of a task, that task's stack should never be cleared when it is
relaunched from home.
int
|
ActivityInfo |
| FLAG_APPEND_TO_GROUP
Flag for addIntentOptions(int, int, int, ComponentName, Intent[], Intent, int, MenuItem[]): if set, do not automatically remove
any existing menu items in the same group.
int
|
Menu |
| FLAG_AUTO_CANCEL
Bit to be bitwise-ored into the flags field that should be
set if the notification should be canceled when it is clicked by the
user.
int
|
Notification |
| FLAG_BLUR_BEHIND
Window flag: blur everything behind this window.
int
|
WindowManager.LayoutParams |
| FLAG_CANCELED
When associated with up key events, this indicates that the key press
has been canceled.
int
|
KeyEvent |
| FLAG_CANCELED_LONG_PRESS
Set when a key event has FLAG_CANCELED set because a long
press action was executed while it was down.
int
|
KeyEvent |
| FLAG_CANCEL_CURRENT
Flag for use with getActivity(Context, int, Intent, int), getBroadcast(Context, int, Intent, int), and
getService(Context, int, Intent, int): if the described PendingIntent already exists,
the current one is canceled before generating a new one.
int
|
PendingIntent |
| FLAG_CLEAR_TASK_ON_LAUNCH
Bit in flags indicating that, when the activity is the root
of a task, that task's stack should be cleared each time the user
re-launches it from home.
int
|
ActivityInfo |
| FLAG_DEBUGGABLE
Value for flags: set to true if this application would like to
allow debugging of its
code, even when installed on a non-development system.
int
|
ApplicationInfo |
| FLAG_DEBUG_LOG_RESOLUTION
A flag you can enable for debugging: when set, log messages will be
printed during the resolution of this intent to show you what has
been found to create the final resolved list.
int
|
Intent |
| FLAG_DIM_BEHIND
Window flag: everything behind this window will be dimmed.
int
|
WindowManager.LayoutParams |
| FLAG_DISMISS_KEYGUARD
Window flag: when set the window will cause the keyguard to
be dismissed, only if it is not a secure lock keyguard.
int
|
WindowManager.LayoutParams |
| FLAG_DITHER
Window flag: turn on dithering when compositing this window to
the screen.
int
|
WindowManager.LayoutParams |
| FLAG_EDITOR_ACTION
This mask is used for compatibility, to identify enter keys that are
coming from an IME whose enter key has been auto-labelled "next" or
"done".
int
|
KeyEvent |
| FLAG_EXCLUDE_FROM_RECENTS
Bit in flags that indicates that the activity should not
appear in the list of recently launched activities.
int
|
ActivityInfo |
| FLAG_FACTORY_TEST
Value for flags: set to true if this application holds the
FACTORY_TEST permission and the
device is running in factory test mode.
int
|
ApplicationInfo |
| FLAG_FINISH_ON_CLOSE_SYSTEM_DIALOGS
Bit in flags indicating that, when a request to close system
windows happens, this activity is finished.
int
|
ActivityInfo |
| FLAG_FINISH_ON_TASK_LAUNCH
Bit in flags indicating that, when the activity's task is
relaunched from home, this activity should be finished.
int
|
ActivityInfo |
| FLAG_FORCE_NOT_FULLSCREEN
Window flag: Override {@link #FLAG_FULLSCREEN and force the
screen decorations (such as status bar) to be shown.
int
|
WindowManager.LayoutParams |
| FLAG_FOREGROUND
Bit for flags: set if the service has asked to
run as a foreground process.
int
|
ActivityManager.RunningServiceInfo |
| FLAG_FOREGROUND_SERVICE
Bit to be bitwise-ored into the flags field that should be
set if this notification represents a currently running service.
int
|
Notification |
| FLAG_FROM_BACKGROUND
Can be set by the caller to indicate that this Intent is coming from
a background operation, not from direct user interaction.
int
|
Intent |
| FLAG_FROM_SYSTEM
This mask is set if an event was known to come from a trusted part
of the system.
int
|
KeyEvent |
| FLAG_FULLSCREEN
Window flag: Hide all screen decorations (e.g.
int
|
WindowManager.LayoutParams |
| FLAG_GRANT_READ_URI_PERMISSION
If set, the recipient of this Intent will be granted permission to
perform read operations on the Uri in the Intent's data.
int
|
Intent |
| FLAG_GRANT_WRITE_URI_PERMISSION
If set, the recipient of this Intent will be granted permission to
perform write operations on the Uri in the Intent's data.
int
|
Intent |
| FLAG_HAS_CODE
Value for flags: set to true if this application has code
associated with it.
int
|
ApplicationInfo |
| FLAG_IGNORE_CHEEK_PRESSES
Window flag: intended for windows that will often be used when the user is
holding the screen against their face, it will aggressively filter the event
stream to prevent unintended presses in this situation that may not be
desired for a particular window, when such an event stream is detected, the
application will receive a CANCEL motion event to indicate this so applications
can handle this accordingly by taking no action on the event
until the finger is released.
int
|
WindowManager.LayoutParams |
| FLAG_IGNORE_GLOBAL_SETTING
Flag for View.performHapticFeedback(int, int): Ignore the global setting
for whether to perform haptic feedback, do it always.
int
|
HapticFeedbackConstants |
| FLAG_IGNORE_VIEW_SETTING
Flag for View.performHapticFeedback(int, int): Ignore the setting in the
view for whether to perform haptic feedback, do it always.
int
|
HapticFeedbackConstants |
| FLAG_INSISTENT
Bit to be bitwise-ored into the flags field that if set,
the audio will be repeated until the notification is
cancelled or the notification window is opened.
int
|
Notification |
| FLAG_KEEP_SCREEN_ON
Window flag: as long as this window is visible to the user, keep
the device's screen turned on and bright.
int
|
WindowManager.LayoutParams |
| FLAG_KEEP_TOUCH_MODE
This mask is set if we don't want the key event to cause us to leave
touch mode.
int
|
KeyEvent |
| FLAG_LAYOUT_INSET_DECOR
Window flag: a special option only for use in combination with
FLAG_LAYOUT_IN_SCREEN.
int
|
WindowManager.LayoutParams |
| FLAG_LAYOUT_IN_SCREEN
Window flag: place the window within the entire screen, ignoring
decorations around the border (a.k.a.
int
|
WindowManager.LayoutParams |
| FLAG_LAYOUT_NO_LIMITS
Window flag: allow window to extend outside of the screen.
int
|
WindowManager.LayoutParams |
| FLAG_LONG_PRESS
This flag is set for the first key repeat that occurs after the
long press timeout.
int
|
KeyEvent |
| FLAG_MULTIPROCESS
Bit in flags indicating whether this activity is able to
run in multiple processes.
int
|
ActivityInfo |
| FLAG_NOT_FOCUSABLE
Window flag: this window won't ever get key input focus, so the
user can not send key or other button events to it.
int
|
WindowManager.LayoutParams |
| FLAG_NOT_TOUCHABLE
Window flag: this window can never receive touch events.
int
|
WindowManager.LayoutParams |
| FLAG_NOT_TOUCH_MODAL
Window flag: Even when this window is focusable (its
{@link #FLAG_NOT_FOCUSABLE is not set), allow any pointer events
outside of the window to be sent to the windows behind it.
int
|
WindowManager.LayoutParams |
| FLAG_NO_CLEAR
Bit to be bitwise-ored into the flags field that should be
set if the notification should not be canceled when the user clicks
the Clear all button.
int
|
Notification |
| FLAG_NO_CREATE
Flag for use with getActivity(Context, int, Intent, int), getBroadcast(Context, int, Intent, int), and
getService(Context, int, Intent, int): if the described PendingIntent does not already
exist, then simply return null instead of creating it.
int
|
PendingIntent |
| FLAG_NO_HISTORY
Bit in flags indicating that, when the user navigates away
from an activity, it should be finished.
int
|
ActivityInfo |
| FLAG_ONEWAY
Flag to transact(int, Parcel, Parcel, int): this is a one-way call, meaning that the
caller returns immediately, without waiting for a result from the
callee.
int
|
IBinder |
| FLAG_ONE_SHOT
Flag for use with getActivity(Context, int, Intent, int), getBroadcast(Context, int, Intent, int), and
getService(Context, int, Intent, int): this
PendingIntent can only be used once.
int
|
PendingIntent |
| FLAG_ONGOING_EVENT
Bit to be bitwise-ored into the flags field that should be
set if this notification is in reference to something that is ongoing,
like a phone call.
int
|
Notification |
| FLAG_ONLY_ALERT_ONCE
Bit to be bitwise-ored into the flags field that should be
set if you want the sound and/or vibration play each time the
notification is sent, even if it has not been canceled before that.
int
|
Notification |
| FLAG_PERFORM_NO_CLOSE
Flag for performShortcut(int, KeyEvent, int): if set, do not close the menu after
executing the shortcut.
int
|
Menu |
| FLAG_PERSISTENT
Value for flags: set to true if this application is persistent.
int
|
ApplicationInfo |
| FLAG_PERSISTENT_PROCESS
Bit for {@link #flags): set if the service is running in a
persistent process.
int
|
ActivityManager.RunningServiceInfo |
| FLAG_PLAY_SOUND
Whether to play a sound when changing the volume.
int
|
AudioManager |
| FLAG_RECEIVER_REGISTERED_ONLY
If set, when sending a broadcast only registered receivers will be
called -- no BroadcastReceiver components will be launched.
int
|
Intent |
| FLAG_REMOVE_SOUND_AND_VIBRATE
Removes any sounds/vibrate that may be in the queue, or are playing (related to
changing volume).
int
|
AudioManager |
| FLAG_REQUIRED
Set on flags if this feature has been required by the application.
int
|
FeatureInfo |
| FLAG_RESIZEABLE_FOR_SCREENS
Value for flags: true when the application knows how to adjust
its UI for different screen sizes.
int
|
ApplicationInfo |
| FLAG_SCALED
Window flag: a special mode where the layout parameters are used
to perform scaling of the surface when it is composited to the
screen.
int
|
WindowManager.LayoutParams |
| FLAG_SECURE
Window flag: don't allow screen shots while this window is
displayed.
int
|
WindowManager.LayoutParams |
| FLAG_SELECTING
Bit for flags: set if the editor is currently in selection mode.
int
|
ExtractedText |
| FLAG_SHOW_LIGHTS
Bit to be bitwise-ored into the flags field that should be
set if you want the LED on for this notification.
int
|
Notification |
| FLAG_SHOW_UI
Show a toast containing the current volume.
int
|
AudioManager |
| FLAG_SHOW_WALLPAPER
Window flag: ask that the system wallpaper be shown behind
your window.
int
|
WindowManager.LayoutParams |
| FLAG_SHOW_WHEN_LOCKED
Window flag: special flag to let windows be shown when the screen
is locked.
int
|
WindowManager.LayoutParams |
| FLAG_SINGLE_LINE
Bit for flags: set if the text being edited can only be on
a single line.
int
|
ExtractedText |
| FLAG_SOFT_KEYBOARD
This mask is set if the key event was generated by a software keyboard.
int
|
KeyEvent |
| FLAG_STARTED
Bit for flags: set if this service has been
explicitly started.
int
|
ActivityManager.RunningServiceInfo |
| FLAG_STATE_NOT_NEEDED
Bit in flags indicating that the activity's state
is not required to be saved, so that if there is a failure the
activity will not be removed from the activity stack.
int
|
ActivityInfo |
| FLAG_SUPPORTS_LARGE_SCREENS
Value for flags: true when the application's window can be
increased in size for larger screens.
int
|
ApplicationInfo |
| FLAG_SUPPORTS_NORMAL_SCREENS
Value for flags: true when the application's window can be
displayed on normal screens.
int
|
ApplicationInfo |
| FLAG_SUPPORTS_SCREEN_DENSITIES
Value for flags: true when the application knows how to
accomodate different screen densities.
int
|
ApplicationInfo |
| FLAG_SUPPORTS_SMALL_SCREENS
Value for flags: true when the application's window can be
reduced in size for smaller screens.
int
|
ApplicationInfo |
| FLAG_SYSTEM
Value for flags: if set, this application is installed in the
device's system image.
int
|
ApplicationInfo |
| FLAG_SYSTEM_PROCESS
Bit for {@link #flags): set if the service is running in a
core system process.
int
|
ActivityManager.RunningServiceInfo |
| FLAG_TEST_ONLY
Value for flags: this is set of the application has specified
android:testOnly to be true.
int
|
ApplicationInfo |
| FLAG_TOUCHABLE_WHEN_WAKING
Window flag: When set, if the device is asleep when the touch
screen is pressed, you will receive this first touch event.
int
|
WindowManager.LayoutParams |
| FLAG_TRACKING
Set for ACTION_UP when this event's key code is still being
tracked from its initial down.
int
|
KeyEvent |
| FLAG_TURN_SCREEN_ON
Window flag: when set as a window is being added or made
visible, once the window has been shown then the system will
poke the power manager's user activity (as if the user had woken
up the device) to turn the screen on.
int
|
WindowManager.LayoutParams |
| FLAG_UPDATED_SYSTEM_APP
Value for flags: this is set if this application has been
install as an update to a built-in system application.
int
|
ApplicationInfo |
| FLAG_UPDATE_CURRENT
Flag for use with getActivity(Context, int, Intent, int), getBroadcast(Context, int, Intent, int), and
getService(Context, int, Intent, int): if the described PendingIntent already exists,
then keep it but its replace its extra data with what is in this new
Intent.
int
|
PendingIntent |
| FLAG_USE_CHILD_DRAWING_ORDER
When set, the drawing method will call getChildDrawingOrder(int, int)
to get the index of the child to draw for that iteration.
int
|
ViewGroup |
| FLAG_VIBRATE
Whether to vibrate if going into the vibrate ringer mode.
int
|
AudioManager |
| FLAG_VIRTUAL_HARD_KEY
This key event was generated by a virtual (on-screen) hard key area.
int
|
KeyEvent |
| FLAG_WATCH_OUTSIDE_TOUCH
Window flag: if you have set FLAG_NOT_TOUCH_MODAL, you
can set this flag to receive a single special MotionEvent with
the action
MotionEvent.ACTION_OUTSIDE for
touches that occur outside of your window.
int
|
WindowManager.LayoutParams |
| FLAG_WOKE_HERE
This mask is set if the device woke because of this key event.
int
|
KeyEvent |
| FLASHLIGHT
Allows access to the flashlight
|
Manifest.permission |
| FLASH_MODE_AUTO
Flash will be fired automatically when required.
|
Camera.Parameters |
| FLASH_MODE_OFF
Flash will not be fired.
|
Camera.Parameters |
| FLASH_MODE_ON
Flash will always be fired during snapshot.
|
Camera.Parameters |
| FLASH_MODE_RED_EYE
Flash will be fired in red-eye reduction mode.
|
Camera.Parameters |
| FLASH_MODE_TORCH
Constant emission of light during preview, auto-focus and snapshot.
|
Camera.Parameters |
| flatten()
Creates a single string with all the parameters set in
this Parameters object.
|
Camera.Parameters |
| flattenToShortString()
The samee as flattenToString(), but abbreviates the class
name if it is a suffix of the package.
|
ComponentName |
| flattenToString()
Return a String that unambiguously describes both the package and
class names contained in the ComponentName.
|
ComponentName |
| fling(int velocityX)
Fling the scroll view
|
HorizontalScrollView |
| fling(int velocityY)
Fling the scroll view
|
ScrollView |
| fling(int startX, int startY, int velocityX, int velocityY, int minX, int maxX, int minY, int maxY)
Start scrolling based on a fling gesture.
|
Scroller |
| flingScroll(int vx, int vy) | WebView |
| flip()
Flips this buffer.
|
Buffer |
| flip(int pos)
Flips the bit at index
pos. |
BitSet |
| flip(int pos1, int pos2)
Flips the bits starting from
pos1 to pos2. |
BitSet |
| flipBit(int n)
Returns a new
BigInteger which has the same binary representation
as this but with the bit at position n flipped. |
BigInteger |
| flipInterval
Must be an integer value, such as " int
|
R.attr |
| FLOAT
The type code that identifies the SQL type
FLOAT.int
|
Types |
| Float(double value)
Constructs a new
Float with the specified primitive double value. |
Float |
| Float(float value)
Constructs a new
Float with the specified primitive float value. |
Float |
| Float(String string)
Constructs a new
Float from the specified string. |
Float |
| floatToIntBits(float value)
Converts the specified float value to a binary representation conforming
to the IEEE 754 floating-point single precision bit layout.
|
Float |
| floatToRawIntBits(float value)
Converts the specified float value to a binary representation conforming
to the IEEE 754 floating-point single precision bit layout.
|
Float |
| floatValue()
Returns this object's value as a float.
|
AtomicInteger |
| floatValue()
Returns this object's value as a float.
|
AtomicLong |
| floatValue()
Returns this
BigDecimal as a float value. |
BigDecimal |
| floatValue()
Returns this
BigInteger as an float value. |
BigInteger |
| floatValue()
Returns this object's value as a float.
|
Byte |
| floatValue()
Returns this object's value as a float.
|
Double |
| floatValue()
Gets the primitive value of this float.
|
Float |
| floatValue()
Returns this object's value as a float.
|
Integer |
| floatValue()
Returns this object's value as a float.
|
Long |
| floatValue()
Returns this object's value as a float.
|
Number |
| floatValue()
Returns this object's value as a float.
|
Short |
| floor(double d)
Returns the double conversion of the most positive (closest to positive
infinity) integer value which is less than the argument.
|
Math |
| floor(double d)
Returns the double conversion of the most positive (closest to
positive infinity) integer value which is less than the argument.
|
StrictMath |
| floor(float value)
Returns the float conversion of the most positive (i.e.
|
FloatMath |
| flush()
Writes out all pending buffered data over the open connection.
|
AbstractClientConnAdapter |
| flush()
Writes out all pending buffered data over the open connection.
|
AbstractHttpClientConnection |
| flush()
Sends all pending buffered data over this connection.
|
AbstractHttpServerConnection |
| flush()
Forces all pending updates to this node and its descendants to be
persisted in the backing store.
|
AbstractPreferences |
| flush() | AbstractSessionOutputBuffer |
| flush()
Flushes the audio data currently queued for playback.
|
AudioTrack |
| flush()
Flushes this stream to ensure all pending data is written out to the
target stream.
|
BufferedOutputStream |
| flush()
Flushes this writer.
|
BufferedWriter |
| flush()
Flushes this writer.
|
CharArrayWriter |
| flush()
Flushes the content buffer and the underlying stream.
|
ChunkedOutputStream |
| flush()
Flushes this cipher output stream.
|
CipherOutputStream |
| flush()
Flushes this stream.
|
ContentLengthOutputStream |
| flush()
Flushes this stream to ensure all pending data is sent out to the target
stream.
|
DataOutputStream |
| flush()
Ensures that all pending data is sent out to the target stream.
|
FilterOutputStream |
| flush()
Flushes this writer to ensure all pending data is sent out to the target
writer.
|
FilterWriter |
| flush()
Flushes the object by writing out any buffered data to the underlying
output.
|
Flushable |
| flush()
Flushes the
Formatter. |
Formatter |
| flush()
Flushes any buffered output.
|
Handler |
| flush()
Writes out all pending buffered data over the open connection.
|
HttpClientConnection |
| flush()
Sends all pending buffered data over this connection.
|
HttpServerConnection |
| flush()
Flushes this stream.
|
IdentityOutputStream |
| flush() | LoggingSessionOutputBuffer |
| flush()
Call target handler to flush any buffered output.
|
MemoryHandler |
| flush()
Flushes the target stream.
|
ObjectOutput |
| flush()
Writes buffered data to the target stream and calls the
flush
method of the target stream. |
ObjectOutputStream |
| flush()
Flushes this stream.
|
OutputStream |
| flush()
Flushes this writer.
|
OutputStreamWriter |
| flush()
Notifies the readers of this PipedInputStream that bytes can be
read.
|
PipedOutputStream |
| flush()
Notifies the readers of this
PipedReader that characters can be read. |
PipedWriter |
| flush()
Forces all pending updates to this node and its descendants to be
persisted in the backing store.
|
Preferences |
| flush()
Ensures that all pending data is sent out to the target stream.
|
PrintStream |
| flush()
Ensures that all pending data is sent out to the target.
|
PrintWriter |
| flush() | SessionOutputBuffer |
| flush()
Flushes any buffered output.
|
StreamHandler |
| flush()
Calling this method has no effect.
|
StringWriter |
| flush()
Flushes this writer.
|
Writer |
| flush()
Write all pending output to the stream.
|
XmlSerializer |
| flush(ByteBuffer out)
Flushes this encoder.
|
CharsetEncoder |
| flush(CharBuffer out)
Flushes this decoder.
|
CharsetDecoder |
| flushBuffer() | AbstractSessionOutputBuffer
(protected) |
| flushCache()
Writes the cache out onto the underlying stream
|
ChunkedOutputStream
(protected) |
| flushCacheWithAppend(byte[] bufferToAppend, int off, int len)
Writes the cache and bufferToAppend to the underlying stream
as one large chunk
|
ChunkedOutputStream
(protected) |
| flushLayoutCache()
Call this to remove all cached loaded layout resources from the
Resources object.
|
Resources |
| flushPendingCommands()
Flush any Binder commands pending in the current thread to the kernel
driver.
|
Binder |
| flushSpi()
Flushes changes of this node to the backing store.
|
AbstractPreferences
(protected) |
| FLUSH_FAILURE
The error code indicating a failure when flushing an output stream.
int
|
ErrorManager |
| focusable
Boolean that controls whether a view can take focus.
int
|
R.attr |
| focusableInTouchMode
Boolean that controls whether a view can take focus while in touch mode.
int
|
R.attr |
| FOCUSABLES_ALL
View flag indicating whether addFocusables(ArrayList, int, int)
should add all focusable Views regardless if they are focusable in touch mode.
int
|
View |
| FOCUSABLES_TOUCH_MODE
View flag indicating whether addFocusables(ArrayList, int, int)
should add only Views focusable in touch mode.
int
|
View |
| focusableViewAvailable(View v)
Tells the parent that a new focusable view has become available.
|
ViewGroup |
| focusableViewAvailable(View v)
Tells the parent that a new focusable view has become available.
|
ViewParent |
| focusCurrentTab(int index)
Sets the current tab and focuses the UI on it.
|
TabWidget |
| FOCUSED_SELECTED_STATE_SET
Indicates the view is focused and selected.
int[]
|
View |
| FOCUSED_SELECTED_WINDOW_FOCUSED_STATE_SET
Indicates the view is focused, selected and its window has the focus.
int[]
|
View |
| FOCUSED_STATE_SET
int[]
|
Activity |
| FOCUSED_STATE_SET
Indicates the view is focused.
int[]
|
View |
| FOCUSED_WINDOW_FOCUSED_STATE_SET
Indicates the view has the focus and that its window has the focus.
int[]
|
View |
| focusSearch(View focused, int direction)
Find the nearest view in the specified direction that wants to take
focus.
|
ViewGroup |
| focusSearch(View v, int direction)
Find the nearest view in the specified direction that wants to take focus
|
ViewParent |
| focusSearch(int direction)
Find the nearest view in the specified direction that can take focus.
|
View |
| FOCUS_AFTER_DESCENDANTS
This view will get focus only if none of its descendants want it.
int
|
ViewGroup |
| FOCUS_BACKWARD
Use with focusSearch(int).
int
|
View |
| FOCUS_BEFORE_DESCENDANTS
This view will get focus before any of its descendants.
int
|
ViewGroup |
| FOCUS_BLOCK_DESCENDANTS
This view will block any of its descendants from getting focus, even
if they are focusable.
int
|
ViewGroup |
| FOCUS_DOWN
Use with focusSearch(int).
int
|
View |
| FOCUS_FORWARD
Use with focusSearch(int).
int
|
View |
| FOCUS_LEFT
Use with focusSearch(int).
int
|
View |
| FOCUS_MODE_AUTO
Auto-focus mode.
|
Camera.Parameters |
| FOCUS_MODE_FIXED
Focus is fixed.
|
Camera.Parameters |
| FOCUS_MODE_INFINITY
Focus is set at infinity.
|
Camera.Parameters |
| FOCUS_MODE_MACRO | Camera.Parameters |
| FOCUS_RIGHT
Use with focusSearch(int).
int
|
View |
| FOCUS_UP
Use with focusSearch(int).
int
|
View |
| following(int offset)
Sets the position of the first boundary to the one following the given
offset and returns this position.
|
BreakIterator |
| FONT
The FONT text attribute key.
|
TextAttribute |
| FONT_SCALE
Scaling factor for fonts, float.
|
Settings.System |
| footerDividersEnabled
When set to false, the ListView will not draw the divider before each footer view.
int
|
R.attr |
| force()
Writes all changes of the buffer to the mapped file.
|
MappedByteBuffer |
| force(boolean metadata)
Requests that all updates to this channel are committed to the storage
device.
|
FileChannel |
| FORCED_ROUTE
Parameter for an forced route.
|
ConnRoutePNames |
| forceFinished(boolean finished)
Force the finished field to a particular value.
|
Scroller |
| forceLayout()
Forces this view to be laid out during the next layout pass.
|
View |
| FORCE_BACK
Allows an application to force a BACK operation on whatever is the
top activity.
|
Manifest.permission |
| forClass()
Returns the class (java.lang.Class) for this descriptor.
|
ObjectStreamClass |
| forDigit(int digit, int radix)
Returns the character which represents the specified digit in the
specified radix.
|
Character |
| foreground
Defines the drawable to draw over the content.
int
|
R.attr |
| FOREGROUND
The FOREGROUND text attribute key.
|
TextAttribute |
| ForegroundColorSpan(Parcel src) | ForegroundColorSpan |
| ForegroundColorSpan(int color) | ForegroundColorSpan |
| foregroundGravity
Defines the gravity to apply to the foreground drawable.
int
|
R.attr |
| fork()
Forks a new Zygote instance, but does not leave the zygote mode.
|
Zygote |
| forkAndSpecialize(int uid, int gid, int[] gids, boolean enableDebugger, int[][] rlimits)
This method is deprecated.
use forkAndSpecialize(int, int, int[], int, int[][])
|
Zygote |
| forkAndSpecialize(int uid, int gid, int[] gids, int debugFlags, int[][] rlimits)
Forks a new VM instance.
|
Zygote |
| forkSystemServer(int uid, int gid, int[] gids, boolean enableDebugger, int[][] rlimits)
This method is deprecated.
use forkSystemServer(int, int, int[], int, int[][])
|
Zygote |
| forkSystemServer(int uid, int gid, int[] gids, int debugFlags, int[][] rlimits)
Special method to start the system server process.
|
Zygote |
| FORMAT
Unicode category constant Cf.
byte
|
Character |
| format
Format string: if specified, the Chronometer will display this
string, with the first "%s" replaced by the current timer value
in "MM:SS" or "H:MM:SS" form.
int
|
R.attr |
| Format()
Constructs a new
Format instance. |
Format |
| format(double value)
Formats the specified double using the rules of this number format.
|
NumberFormat |
| format(double value, StringBuffer buffer, FieldPosition field)
Appends the string associated with the range in which the specified
double value fits to the specified string buffer.
|
ChoiceFormat |
| format(double value, StringBuffer buffer, FieldPosition position)
Formats the specified double value as a string using the pattern of this
decimal format and appends the string to the specified string buffer.
|
DecimalFormat |
| format(double value, StringBuffer buffer, FieldPosition field)
Formats the specified double value as a string using the pattern of this
number format and appends the string to the specified string buffer.
|
NumberFormat |
| format(CharSequence inFormat, Calendar inDate)
Given a format string and a Calendar object, returns a CharSequence
containing the requested date.
|
DateFormat |
| format(CharSequence inFormat, Date inDate)
Given a format string and a Date object, returns a CharSequence containing
the requested date.
|
DateFormat |
| format(CharSequence inFormat, long inTimeInMillis)
Given a format string and a time in milliseconds since Jan 1, 1970 GMT, returns a
CharSequence containing the requested date.
|
DateFormat |
| format(Object object)
Formats the specified object using the rules of this format.
|
Format |
| format(Object object, StringBuffer buffer, FieldPosition field)
Formats the specified object as a string using the pattern of this date
format and appends the string to the specified string buffer.
|
DateFormat |
| format(Object number, StringBuffer toAppendTo, FieldPosition pos)
Formats the specified object as a string using the pattern of this
decimal format and appends the string to the specified string buffer.
|
DecimalFormat |
| format(Object object, StringBuffer buffer, FieldPosition field)
Appends the specified object to the specified string buffer using the
rules of this format.
|
Format |
| format(Object object, StringBuffer buffer, FieldPosition field)
Converts the specified objects into a string which it appends to the
specified string buffer using the pattern of this message format.
|
MessageFormat |
| format(Object object, StringBuffer buffer, FieldPosition field)
Formats the specified object as a string using the pattern of this number
format and appends the string to the specified string buffer.
|
NumberFormat |
| format(Object[] objects, StringBuffer buffer, FieldPosition field)
Converts the specified objects into a string which it appends to the
specified string buffer using the pattern of this message format.
|
MessageFormat |
| format(String format)
Print the current value given the format string provided.
|
Time |
| format(String format, Object... args)
Writes a formatted string to the output destination of the
Formatter. |
Formatter |
| format(String template, Object... objects)
Formats the supplied objects using the specified message format pattern.
|
MessageFormat |
| format(String format, Object... args)
Writes a string formatted by an intermediate
Formatter to the
target stream using the specified format string and arguments. |
PrintStream |
| format(String format, Object... args)
Writes a string formatted by an intermediate
Formatter to the
target using the specified format string and arguments. |
PrintWriter |
| format(String format, Object... args)
Returns a formatted string, using the supplied format and arguments,
using the default locale.
|
String |
| format(Date date)
Formats the specified date using the rules of this date format.
|
DateFormat |
| format(Date date, StringBuffer buffer, FieldPosition field)
Formats the specified date as a string using the pattern of this date
format and appends the string to the specified string buffer.
|
DateFormat |
| format(Date date, StringBuffer buffer, FieldPosition fieldPos)
Formats the specified date as a string using the pattern of this date
format and appends the string to the specified string buffer.
|
SimpleDateFormat |
| format(List<? extends NameValuePair> parameters, String encoding)
Returns a String that is suitable for use as an
application/x-www-form-urlencoded
list of parameters in an HTTP PUT or HTTP POST. |
URLEncodedUtils |
| format(Locale l, String format, Object... args)
Writes a formatted string to the output destination of the
Formatter. |
Formatter |
| format(Locale l, String format, Object... args)
Writes a string formatted by an intermediate Formatter to this
stream using the specified locale, format string and arguments.
|
PrintStream |
| format(Locale l, String format, Object... args)
Writes a string formatted by an intermediate
Formatter to the
target using the specified locale, format string and arguments. |
PrintWriter |
| format(Locale loc, String format, Object... args)
Returns a formatted string, using the supplied format and arguments,
accordingly to the specified locale.
|
String |
| format(LogRecord r)
Converts a LogRecord object into a string representation.
|
Formatter |
| format(LogRecord r)
Converts a LogRecord object into a human readable string
representation.
|
SimpleFormatter |
| format(LogRecord r)
Converts a
LogRecord into an XML string. |
XMLFormatter |
| format(long value)
Formats the specified long using the rules of this number format.
|
NumberFormat |
| format(long value, StringBuffer buffer, FieldPosition field)
Appends the string associated with the range in which the specified long
value fits to the specified string buffer.
|
ChoiceFormat |
| format(long value, StringBuffer buffer, FieldPosition position)
Formats the specified long value as a string using the pattern of this
decimal format and appends the string to the specified string buffer.
|
DecimalFormat |
| format(long value, StringBuffer buffer, FieldPosition field)
Formats the specified long value as a string using the pattern of this
number format and appends the string to the specified string buffer.
|
NumberFormat |
| format2445()
Format according to RFC 2445 DATETIME type.
|
Time |
| format3339(boolean allDay)
Return a string in the RFC 3339 format.
|
Time |
| formatCookieAsVer(CharArrayBuffer buffer, Cookie cookie, int version)
Return a string suitable for sending in a "Cookie" header
as defined in RFC 2109 for backward compatibility with cookie version 0
|
RFC2109Spec
(protected) |
| formatCookieAsVer(CharArrayBuffer buffer, Cookie cookie, int version)
Adds valid Port attribute value, e.g.
|
RFC2965Spec
(protected) |
| formatCookies(List<Cookie> cookies)
Create "Cookie" headers for an array of Cookies.
|
BestMatchSpec |
| formatCookies(List<Cookie> cookies) | BrowserCompatSpec |
| formatCookies(List<Cookie> cookies)
Create "Cookie" headers for an array of Cookies.
|
CookieSpec |
| formatCookies(List<Cookie> cookies) | NetscapeDraftSpec |
| formatCookies(List<Cookie> cookies) | RFC2109Spec |
| formatDate(Date date)
Formats the given date according to the RFC 1123 pattern.
|
DateUtils |
| formatDate(Date date, String pattern)
Formats the given date according to the specified pattern.
|
DateUtils |
| formatDateRange(Context context, Formatter formatter, long startMillis, long endMillis, int flags)
Formats a date or a time range according to the local conventions.
|
DateUtils |
| formatDateRange(Context context, long startMillis, long endMillis, int flags)
Formats a date or a time range according to the local conventions.
|
DateUtils |
| formatDateTime(Context context, long millis, int flags)
Formats a date or a time according to the local conventions.
|
DateUtils |
| formatElapsedTime(StringBuilder recycle, long elapsedSeconds)
Formats an elapsed time in the form "MM:SS" or "H:MM:SS"
for display on the call-in-progress screen.
|
DateUtils |
| formatElapsedTime(long elapsedSeconds)
Formats an elapsed time in the form "MM:SS" or "H:MM:SS"
for display on the call-in-progress screen.
|
DateUtils |
| formatElements(HeaderElement[] elems, boolean quote, HeaderValueFormatter formatter)
Formats an array of header elements.
|
BasicHeaderValueFormatter |
| formatElements(CharArrayBuffer buffer, HeaderElement[] elems, boolean quote)
Formats an array of header elements.
|
BasicHeaderValueFormatter |
| formatElements(CharArrayBuffer buffer, HeaderElement[] elems, boolean quote)
Formats an array of header elements.
|
HeaderValueFormatter |
| formatFileSize(Context context, long number)
Formats a content size to be in the form of bytes, kilobytes, megabytes, etc
|
Formatter |
| FormatFlagsConversionMismatchException(String f, char c)
Constructs a new
FormatFlagsConversionMismatchException with the
flags and conversion specified. |
FormatFlagsConversionMismatchException |
| formatHasAlpha(int format) | PixelFormat |
| formatHeader(Header header, LineFormatter formatter)
Formats a header.
|
BasicLineFormatter |
| formatHeader(CharArrayBuffer buffer, Header header)
Formats a header.
|
BasicLineFormatter |
| formatHeader(CharArrayBuffer buffer, Header header)
Formats a header.
|
LineFormatter |
| formatHeaderElement(HeaderElement elem, boolean quote, HeaderValueFormatter formatter)
Formats a header element.
|
BasicHeaderValueFormatter |
| formatHeaderElement(CharArrayBuffer buffer, HeaderElement elem, boolean quote)
Formats one header element.
|
BasicHeaderValueFormatter |
| formatHeaderElement(CharArrayBuffer buffer, HeaderElement elem, boolean quote)
Formats one header element.
|
HeaderValueFormatter |
| formatIpAddress(int addr)
Returns a string in the canonical IP format ###.###.###.### from a packed integer containing
the IP address.
|
Formatter |
| formatJapaneseNumber(Editable text)
Formats a phone number in-place using the Japanese formatting rules.
|
PhoneNumberUtils |
| formatMessage(LogRecord r)
Formats a
LogRecord object into a localized string
representation. |
Formatter |
| formatNameValuePair(NameValuePair nvp, boolean quote, HeaderValueFormatter formatter)
Formats a name-value pair.
|
BasicHeaderValueFormatter |
| formatNameValuePair(CharArrayBuffer buffer, NameValuePair nvp, boolean quote)
Formats one name-value pair, where the value is optional.
|
BasicHeaderValueFormatter |
| formatNameValuePair(CharArrayBuffer buffer, NameValuePair nvp, boolean quote)
Formats one name-value pair, where the value is optional.
|
HeaderValueFormatter |
| formatNanpNumber(Editable text)
Formats a phone number in-place using the NANP formatting rules.
|
PhoneNumberUtils |
| formatNumber(Editable text, int defaultFormattingType)
Formats a phone number in-place.
|
PhoneNumberUtils |
| formatNumber(String source)
Breaks the given number down and formats it according to the rules
for the country the number is from.
|
PhoneNumberUtils |
| formatParamAsVer(CharArrayBuffer buffer, String name, String value, int version)
Return a name/value string suitable for sending in a "Cookie"
header as defined in RFC 2109 for backward compatibility with cookie
version 0
|
RFC2109Spec
(protected) |
| formatParameters(NameValuePair[] nvps, boolean quote, HeaderValueFormatter formatter)
Formats a set of parameters.
|
BasicHeaderValueFormatter |
| formatParameters(CharArrayBuffer buffer, NameValuePair[] nvps, boolean quote)
Formats the parameters of a header element.
|
BasicHeaderValueFormatter |
| formatParameters(CharArrayBuffer buffer, NameValuePair[] nvps, boolean quote)
Formats the parameters of a header element.
|
HeaderValueFormatter |
| formatProtocolVersion(ProtocolVersion version, LineFormatter formatter)
Formats a protocol version.
|
BasicLineFormatter |
| formatRequestLine(RequestLine reqline, LineFormatter formatter)
Formats a request line.
|
BasicLineFormatter |
| formatRequestLine(CharArrayBuffer buffer, RequestLine reqline)
Formats a request line.
|
BasicLineFormatter |
| formatRequestLine(CharArrayBuffer buffer, RequestLine reqline)
Formats a request line.
|
LineFormatter |
| formatSameDayTime(long then, long now, int dateStyle, int timeStyle)
Format a date / time such that if the then is on the same day as now, it shows
just the time and if it's a different day, it shows just the date.
|
DateUtils |
| formatShortFileSize(Context context, long number)
Like formatFileSize(Context, long), but trying to generate shorter numbers
(showing fewer digits of precisin).
|
Formatter |
| formatStatusLine(StatusLine statline, LineFormatter formatter)
Formats a status line.
|
BasicLineFormatter |
| formatStatusLine(CharArrayBuffer buffer, StatusLine statline)
Formats a status line.
|
BasicLineFormatter |
| formatStatusLine(CharArrayBuffer buffer, StatusLine statline)
Formats a status line.
|
LineFormatter |
| FORMATTED_ADDRESS
The full, unstructured postal address.
|
ContactsContract.CommonDataKinds.StructuredPostal |
| Formatter()
Constructs a
Formatter. |
Formatter |
| Formatter() | Formatter |
| Formatter(File file)
Constructs a
Formatter whose output is written to the specified File. |
Formatter |
| Formatter(File file, String csn)
Constructs a
Formatter with the given charset,
and whose output is written to the specified File. |
Formatter |
| Formatter(File file, String csn, Locale l)
Constructs a
Formatter with the given Locale and charset,
and whose output is written to the specified File. |
Formatter |
| Formatter(OutputStream os)
Constructs a
Formatter whose output is written to the specified OutputStream. |
Formatter |
| Formatter(OutputStream os, String csn)
Constructs a
Formatter with the given charset,
and whose output is written to the specified OutputStream. |
Formatter |
| Formatter(OutputStream os, String csn, Locale l)
Constructs a
Formatter with the given Locale and charset,
and whose output is written to the specified OutputStream. |
Formatter |
| Formatter(PrintStream ps)
Constructs a
Formatter whose output is written to the specified PrintStream. |
Formatter |
| Formatter(Appendable a)
Constructs a
Formatter whose output will be written to the
specified Appendable. |
Formatter |
| Formatter(Appendable a, Locale l)
Constructs a
Formatter with the specified Locale
and whose output will be written to the
specified Appendable. |
Formatter |
| Formatter(String fileName)
Constructs a
Formatter whose output is written to the specified file. |
Formatter |
| Formatter(String fileName, String csn)
Constructs a
Formatter whose output is written to the specified file. |
Formatter |
| Formatter(String fileName, String csn, Locale l)
Constructs a
Formatter with the given Locale and charset,
and whose output is written to the specified file. |
Formatter |
| Formatter(Locale l)
Constructs a
Formatter with the specified Locale. |
Formatter |
| FormatterClosedException()
Constructs a new
FormatterClosedException with the stack trace
filled in. |
FormatterClosedException |
| formatTo(Formatter formatter, int flags, int width, int precision)
Formats the object using the specified
Formatter. |
Formattable |
| formatToCharacterIterator(Object object)
Formats the specified object using the rules of this decimal format and
returns an
AttributedCharacterIterator with the formatted number
and attributes. |
DecimalFormat |
| formatToCharacterIterator(Object object)
Formats the specified object using the rules of this format and returns
an
AttributedCharacterIterator with the formatted string and no
attributes. |
Format |
| formatToCharacterIterator(Object object)
Formats the specified object using the rules of this message format and
returns an
AttributedCharacterIterator with the formatted message and
attributes. |
MessageFormat |
| formatToCharacterIterator(Object object)
Formats the specified object using the rules of this simple date format
and returns an
AttributedCharacterIterator with the formatted
date and attributes. |
SimpleDateFormat |
| FORMAT_12HOUR
int
|
DateUtils |
| FORMAT_24HOUR
int
|
DateUtils |
| FORMAT_ABBREV_ALL
int
|
DateUtils |
| FORMAT_ABBREV_MONTH
int
|
DateUtils |
| FORMAT_ABBREV_RELATIVE
int
|
DateUtils |
| FORMAT_ABBREV_TIME
int
|
DateUtils |
| FORMAT_ABBREV_WEEKDAY
int
|
DateUtils |
| FORMAT_CAP_AMPM
int
|
DateUtils |
| FORMAT_CAP_MIDNIGHT
int
|
DateUtils |
| FORMAT_CAP_NOON
int
|
DateUtils |
| FORMAT_CAP_NOON_MIDNIGHT
int
|
DateUtils |
| FORMAT_CHANGED
int
|
WindowManager.LayoutParams |
| FORMAT_DEGREES
Constant used to specify formatting of a latitude or longitude
in the form "[+-]DDD.DDDDD where D indicates degrees.
int
|
Location |
| FORMAT_FAILURE
The error code indicating a failure when formatting the error messages.
int
|
ErrorManager |
| FORMAT_JAPAN
Japanese formatting
int
|
PhoneNumberUtils |
| FORMAT_MINUTES
Constant used to specify formatting of a latitude or longitude
in the form "[+-]DDD:MM.MMMMM" where D indicates degrees and
M indicates minutes of arc (1 minute = 1/60th of a degree).
int
|
Location |
| FORMAT_NANP
NANP formatting
int
|
PhoneNumberUtils |
| FORMAT_NO_MIDNIGHT
int
|
DateUtils |
| FORMAT_NO_MONTH_DAY
int
|
DateUtils |
| FORMAT_NO_NOON
int
|
DateUtils |
| FORMAT_NO_NOON_MIDNIGHT
int
|
DateUtils |
| FORMAT_NO_YEAR
int
|
DateUtils |
| FORMAT_NUMERIC_DATE
int
|
DateUtils |
| FORMAT_SECONDS
Constant used to specify formatting of a latitude or longitude
in the form "DDD:MM:SS.SSSSS" where D indicates degrees, M
indicates minutes of arc, and S indicates seconds of arc (1
minute = 1/60th of a degree, 1 second = 1/3600th of a degree).
int
|
Location |
| FORMAT_SHOW_DATE
int
|
DateUtils |
| FORMAT_SHOW_TIME
int
|
DateUtils |
| FORMAT_SHOW_WEEKDAY
int
|
DateUtils |
| FORMAT_SHOW_YEAR
int
|
DateUtils |
| FORMAT_UNKNOWN
The current locale is unknown, look for a country code or don't format
int
|
PhoneNumberUtils |
| FORMAT_UTC
int
|
DateUtils |
| forName(String blockName)
Retrieves the constant that corresponds to the specified block name.
|
Character.UnicodeBlock |
| forName(String charsetName)
Gets a
Charset instance for the specified charset name. |
Charset |
| forName(String className)
Returns a
Class object which represents the class with the
specified name. |
Class |
| forName(String className, boolean initializeBoolean, ClassLoader classLoader)
Returns a
Class object which represents the class with the
specified name. |
Class |
| forVersion(int major, int minor)
Obtains a specific HTTP version.
|
HttpVersion |
| forVersion(int major, int minor)
Obtains a specific version of this protocol.
|
ProtocolVersion |
| foundType()
Returns the invalid type.
|
AnnotationTypeMismatchException |
| FRACTION
This constant stands for the fraction part of the number.
|
NumberFormat.Field |
| FRACTION_FIELD
Field constant identifying the fractional part of a number.
int
|
NumberFormat |
| fragment(String fragment)
Encodes and sets the fragment.
|
Uri.Builder |
| FrameLayout(Context context) | FrameLayout |
| FrameLayout(Context context, AttributeSet attrs) | FrameLayout |
| FrameLayout(Context context, AttributeSet attrs, int defStyle) | FrameLayout |
| FrameLayout.LayoutParams(Context c, AttributeSet attrs)
|
FrameLayout.LayoutParams |
| FrameLayout.LayoutParams(ViewGroup.LayoutParams source)
|
FrameLayout.LayoutParams |
| FrameLayout.LayoutParams(ViewGroup.MarginLayoutParams source)
|
FrameLayout.LayoutParams |
| FrameLayout.LayoutParams(int width, int height)
|
FrameLayout.LayoutParams |
| FrameLayout.LayoutParams(int width, int height, int gravity)
Creates a new set of layout parameters with the specified width, height
and weight.
|
FrameLayout.LayoutParams |
| FRANCE
Locale constant for fr_FR.
|
Locale |
| freeEntry(BasicPoolEntry entry)
Returns an allocated entry to this pool.
|
RouteSpecificPool |
| freeEntry(BasicPoolEntry entry, boolean reusable, long validDuration, TimeUnit timeUnit)
Returns an entry into the pool.
|
AbstractConnPool |
| freeEntry(BasicPoolEntry entry, boolean reusable, long validDuration, TimeUnit timeUnit)
Returns an entry into the pool.
|
ConnPoolByRoute |
| freeGlCaches()
Call this to free up OpenGL resources that may be cached or allocated
on behalf of the Canvas.
|
Canvas |
| freeLastRow()
Free the last row
|
CursorWindow |
| freeMemory()
Returns the amount of free memory resources which are available to the
running program.
|
Runtime |
| freeze() | Surface |
| freezesText
If set, the text view will include its current complete text
inside of its frozen icicle in addition to meta-data such as
the current cursor position.
int
|
R.attr |
| FRENCH
Locale constant for fr.
|
Locale |
| FREQUENCY
The frequency column.
|
UserDictionary.Words |
| frequency(Collection<?> c, Object o)
Returns the number of elements in the
Collection that match the
Object passed. |
Collections |
| FRIDAY
Value of the
DAY_OF_WEEK field indicating Friday.int
|
Calendar |
| FRIDAY
int
|
Time |
| from(Context context)
Obtains the LayoutInflater from the given context.
|
LayoutInflater |
| fromAlpha
Must be a floating point value, such as " int
|
R.attr |
| fromContext(Context context, int resourceId)
Creates a new ShortcutIconResource for the specified context and resource
identifier.
|
Intent.ShortcutIconResource |
| fromDegrees
Must be a floating point value, such as " int
|
R.attr |
| fromFile(File path) | GestureLibraries |
| fromFile(File file)
Creates a Uri from a file.
|
Uri |
| fromFile(String path) | GestureLibraries |
| fromHtml(String source)
Returns displayable styled text from the provided HTML string.
|
Html |
| fromHtml(String source, Html.ImageGetter imageGetter, Html.TagHandler tagHandler)
Returns displayable styled text from the provided HTML string.
|
Html |
| fromMap(String pckg, Map info, ClassLoader clsldr)
Instantiates version information from properties.
|
VersionInfo
(protected) |
| fromParts(String scheme, String ssp, String fragment)
Creates an opaque Uri from the given components.
|
Uri |
| fromPrivateFile(Context context, String name) | GestureLibraries |
| fromRawResource(Context context, int resourceId) | GestureLibraries |
| fromSocket(Socket socket)
Create a new ParcelFileDescriptor from the specified Socket.
|
ParcelFileDescriptor |
| fromString(String uuid)
Creates a new ParcelUuid from a string representation of UUID.
|
ParcelUuid |
| fromString(String uuid)
Parses a UUID string with the format defined by toString(). |
UUID |
| fromXDelta
May be a floating point value, such as " int
|
R.attr |
| fromXScale
Must be a floating point value, such as " int
|
R.attr |
| fromYDelta
May be a floating point value, such as " int
|
R.attr |
| fromYScale
Must be a floating point value, such as " int
|
R.attr |
| frustumCullSpheres(float[] mvp, int mvpOffset, float[] spheres, int spheresOffset, int spheresCount, int[] results, int resultsOffset, int resultsCapacity)
Given an OpenGL ES ModelView-Projection matrix (which implicitly
describes a frustum) and a list of spheres, determine which spheres
intersect the frustum.
|
Visibility |
| frustumM(float[] m, int offset, float left, float right, float bottom, float top, float near, float far)
Define a projection matrix in terms of six clip planes
|
Matrix |
| FULL
The format style constant defining the full style.
int
|
DateFormat |
| fullBright
May be a reference to another resource, in the form " int
|
R.attr |
| fullDark
May be a reference to another resource, in the form " int
|
R.attr |
| fullScroll(int direction)
Handles scrolling in response to a "home/end" shortcut press. |
HorizontalScrollView |
| fullScroll(int direction)
Handles scrolling in response to a "home/end" shortcut press. |
ScrollView |
| FULL_COLOR_LAYER_SAVE_FLAG
the layer needs to 8-bits per color component
int
|
Canvas |
| FULL_DECOMPOSITION
Constant used to specify the decomposition rule.
int
|
Collator |
| FULL_MODE
This constant is deprecated.
see ContactsContract
|
Contacts.Intents.Insert |
| FULL_MODE
If present, forces a bypass of quick insert mode.
|
ContactsContract.Intents.Insert |
| FULL_SCREEN_KIND
int
|
MediaStore.Images.Thumbnails |
| FULL_SCREEN_KIND
int
|
MediaStore.Video.Thumbnails |
| FULL_WAKE_LOCK
Wake lock that ensures that the screen and keyboard are on at
full brightness.
int
|
PowerManager |
| functionalTest
Flag indicating that an Instrumentation class should be run as a
functional test.
int
|
R.attr |
| FutureTask(Runnable runnable, V result)
Creates a FutureTask that will, upon running, execute the
given Runnable, and arrange that get will return the
given result on successful completion.
|
FutureTask |
| FutureTask(Callable<V> callable)
Creates a FutureTask that will, upon running, execute the
given Callable.
|
FutureTask |
| FX_FOCUS_NAVIGATION_DOWN
Focus has moved down
int
|
AudioManager |
| FX_FOCUS_NAVIGATION_LEFT
Focus has moved left
int
|
AudioManager |
| FX_FOCUS_NAVIGATION_RIGHT
Focus has moved right
int
|
AudioManager |
| FX_FOCUS_NAVIGATION_UP
Focus has moved up
int
|
AudioManager |
| FX_KEYPRESS_DELETE
IME delete keypress sound
int
|
AudioManager |
| FX_KEYPRESS_RETURN
IME return_keypress sound
int
|
AudioManager |
| FX_KEYPRESS_SPACEBAR
IME spacebar keypress sound
int
|
AudioManager |
| FX_KEYPRESS_STANDARD
IME standard keypress sound
int
|
AudioManager |
| FX_KEY_CLICK
Keyboard and direction pad click sound
int
|
AudioManager |
| FX_SURFACE_BLUR
Creates a Blur surface.
int
|
Surface |
| FX_SURFACE_DIM
Creates a Dim surface.
int
|
Surface |
| FX_SURFACE_MASK
Mask used for FX values above
int
|
Surface |
| FX_SURFACE_NORMAL
Creates a normal surface.
int
|
Surface |
